- How do you set the ignition. Set the timing by yourself
How do you set the ignition. Set the timing by yourself
When the engine overheats, does not develop the necessary power or "knocking fingers", cause looking at correctly established moment of ignition.
distributorbody breakercoincides desiredcoincides desired markcoincides desired mark timingdesired mark
Method 1 – strobe
- Warmed the engine to operating temperaturePlug the power supply to the strobe light to the carThe sensor signal triggering, dress on high voltage wire of cylinder 1Weaken a nut 13 for fixing the housing of the interrupter-distributorRemove the hose vaccum corrector and deafen himThe light from the strobe is directed to the crankshaft pulleyWe start the engine, the rpm idleSwing the body of the distributorFix the position of the housing of the interrupter-distributor, whereby the pulley mark will coincide with the desired mark on the timing coverTighten the attaching nut
Method 2 – By the light
Cranking the crankshaft to the position at which the label of the pulley coincides with the desired mark on the timing cover, and the runner breaker, distributor pointed to a high-voltage wire of 1st cylinderWeaken the nut that secures the housing of the distributorOne wire control lamp on 12 In connected to the wire coming from the distributor to the ignition coil, and the other the "weight" of the carTurn on the ignition (a must!)Clockwise rotate the distributor body until the light turns offSlowly rotate the distributor in the opposite direction (counter-clockwise)Fix the position of the distributor at which the fire indicator lightsTighten the nut securing the breaker allocator
Method 3 – the spark
Cranking the crankshaft to the position at which the label of the pulley coincides with the desired mark on the timing cover and the slider of the distributor pointed to a high-voltage wire of 1st cylinderWeaken the nut that secures the housing of the breaker the ignition distributorCentral high-voltage wire is taken out from the cover tramblera, and his contact have a distance of 5 mm from the "masses" of the carTurn on the ignitionSwing the body of the breaker clockwise 200Медленно rotate the distributor in the opposite directionFix the position of the distributor in which the contact between the Central wire and ground the spark jumpsTighten the nut securing the breaker
Method 4 – sound
we start the engineWeaken the nut that secures the housing of the distributorSlowly swing the body of the breaker of the distributor in both directionsFix the position of the distributor at which the engine will be the most stable and the turnover maximumTurn the body of the breaker 2-30 clockwiseTighten the attaching nut distributor
Method 5 — "MD-1"
About it — in a separate articleNo matter how you set the ignition timing, it is necessary to check its correctness with the help of the famous way to 4th gear.