Don't want all the passers-by looked You in the car? There is a solution – tinted glass. New zatonirovany glass, are very, very well, but there is another solution, ETS
2016-08-30 06:16:00 68
How to toned glass machine How to toned glass machine with their hands VIDEO How to do the shading with your hands
don't want all the passers-by looked You in the car? There is a solution – tinted glass. New zatonirovany glass, are very, very well, but there is another solution, you can make them with your own hands! It will take time, but will save you money. Besides toning not only solves the above problem, but also problems with the heating of the cabin, protection from UV rays, and protect them in the event of glass breaking.
Recently, we shared with You how you can detachable tinted glass, today we will tell you how toned glass, not removing them. To start, let's prepare the necessary materials:• Tinting film size of all the Windows that we wish to toned.• Spatula, rubber. Do not recommend plastic, because it leaves traces. • utility knife.• for cleaning glasses. • Rag, preferably lint-free.• Spray.We also advises not to do this one, it is better to take a partner. Once everything is ready, you can get to work!1. The first thing should be very well washed glass (it is desirable to remove the glass). Cleaned all the glass from chipping, spraying a greasy residue. 2. Prepare a soapy solution to work with film. In warm water, pour shampoo (detergent). The prepared solution poured into the spray bottle. 3. Apresov solution of the outer side of the glass, begin to glue a film. In advance, cut the desired size with a small margin. The main thing here is the care of that film to stick on the right side. The dark layer needs to be directed inward and outward transparent.
4. The next step is to level and trim the film. Leave a margin of 1 cm on all sides.
5. Now, use the assistant, because the job is not easy. We ought to separate the dark from the transparent layer. Spray spray the inside of the glass and carefully separate the two layers.
6. Next, very carefully smooths the tape from the center to the edges. Get rid of all bubbles.
7. Cut the edges, and our tinting done! A Hairdryer can dry glass, but it is not required!